The Buck Stove Model 91 catalytic is our most popular selling wood stove. Used as a masonry fireplace insert, or freestanding – this unit easily accepts 21″ logs and heats up to 3200 square feet with an astonishing 50,400 BTU’s per hour. Features include a factory installed blower, high efficiency heat exchanger, ash removal tray and oversized glass door with air wash system. Model shown with the pewter door and pewter window option. Gold and black door options available.
STOVE DIMENSIONS: 34-1/4″ W x 23-3/16″ H x 28-7/8″ D
MINIMUM FIREPLACE DIMENSIONS: 23-1/2″ H x 31-3/4″ W x 15-1/2″ D
FREESTANDING CLEARANCE TO COMBUSTIBLES*
16″ check (Corner) – 23″ (Rear) – 24″ (Side)
HEAT CAPACITY – 1,800 – 3,200 Sq. Feet
EPA Tested Output BTU/H – 50,400
EMISSIONS G/H- 1.2
CUBIC FEET FIREBOX VOLUME- 4.4
FIREWOOD LENGTH- 22″ (front to back) 23″(side to side)
ASHPAN – YES
BLOWER – YES
FLUE SIZE – 8″
EFFICIENCY – 86%
OPTIONAL PEDESTAL – YES (8″H)
PRE FAB APPROVED – NO
MOBILE HOME APPROVED – NO
STOVE WEIGHT – 620 Lbs
HEARTH PAD SIZE 50″ W x 54″ D***
* The clearances listed may be reduced. Check owner’s manual for details or follow NFPA-211 code if available.
** Model 91 is tested with only double wall pipe.
*** Hearth pad size listed is the minimum size required for verticle vent installations
Heating capacities, weight and efficiency are approximations only. The actual performance of the unit may vary depending on climate, condition and type of wood used, stove location, burn rate, accessories chosen, home layout and insulation, ceiling heights, and how the unit is operated. All styles, colors, options, features and sizes are subject to change without notice.
Stone fireplaces, large flues, double flues & fireplaces with existing ash dump may require optional direct connect kits.
See dealer for details. All Buck Wood Stoves, fireplace inserts and freestanding stoves are tested and listed to UL Standards by ITC (Warnock Hersey/Intertek).
